Fluke 106 Cep Tipi Dijital Multimetre

Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, relative humidity at 0 % to 75 %. Accuracy specifications take the form of: ±([% of Reading] + [Number of Least Significant Digits])
Accuracy SpecificationsFunctionRangeResolutionAccuracyAC Volts¹6.000 V
60.00 V
600.0 V0.001 V
0.01 V
0.1 V1.0 % + 3DC Volts6.000 V
60.00 V
600.0 V0.001 V
0.01 V
0.1 V0.5 % + 3AC Millivolts600.0 mV0.1 mV3.0 % + 3Diode Test²2.000 V0.001 V10 %Resistance 
(Ohms)400.0 O
4.000 kO
40.00 kO
400.0 kO
4.000 MO
40.00 MO0.1 O
0.001 kO
0.01 kO
0.1 kO
0.001 MO
0.01 MO0.5 % + 3
0.5 % + 2
0.5 % + 2
0.5 % + 2
0.5 % + 2
1.5% + 3Capacitance³50.00 nF
500.0 nF
5.000 µF
50.00 µF
500.0 µF
1000 µF0.01 nF
0.1 nF
0.001 µF
0.01 µF
0.1 µF
1 µF2 % + 5
2 % + 5
5 % + 5
5 % + 5
5 % + 5
5 % + 5Frequency⁴ Hz
(10 Hz – 100 kHz)50.00 Hz
500.0 Hz
5.000 kHz
50.00 kHz
100.0 kHz0.01 Hz
0.1 Hz
0.001 kHz
0.01 kHz
0.1 kHzNADuty Cycle⁴1 % to 99 %0.1 %NAAC Current
(40 Hz to 200 Hz)4.000 A
10.00 A0.001 A
0.01 A1.5 % + 3DC Current4.000 A
10.00 A0.001 A
0.01 A1.5 % + 3All AC, Hz, and duty cycle are specified from 1 % to 100 % of range. Inputs below 1 % of range are not specified.Typically, open circuit test voltage is 2.0 V and short circuit current is <0.6 mA.Specifications do not include errors due to test lead capacitance and capacitance floor (may be up to 1.5 nF in the 50 nF range).All AC, Hz, and duty cycle are specified from 1 % to 100 % of range. Inputs below 1 % of range are not specified.FunctionOverload ProtectionInput Impedance (Nominal)Common Mode Rejection RatioNormal Mode Rejection RatioAC Volts600 V ¹>10 MO <100 pF ²>60 dB at dc,
50 Hz or 60 Hz-AC Millivolts600 mV>1M, <100 pF>80 dB at 50 Hz or 60 Hz-DC Volts600 V ¹>10 MO <100 pF>100 dB at dc,
50 Hz or 60 Hz>60 dB at 50 Hz or 60 Hz6 x 105 V Hz MaxFor mV (AC), input impedance is approximately 1 MO.General SpecificationsMaximum Voltage Between any Terminal and Earth Ground600 VDisplay (LCD)6000 counts, updates 3/secBattery Type2 AAA, NEDA 24A, IEC LR03Battery Life200 hours minimumTemperatureOperating0 °C to 40 °CStorage-30 °C to 60 °CRelative HumidityOperating HumidityNon-condensing when <10°C
=90 % at 10 °C to 30 °C; =75 % at 30 °C to 40 °COperating Humidity, 40 MO Range=80 % at 10 °C to 30 °C; =70 % at 30 °C to 40 °CAltitudeOperating2000 mStorage12,000 mTemperature Coefficient0.1 X (specified accuracy) /°C (<18 °C or >28 °C)Fuse Protection for Current Inputs11A, 1000V Fast Fuse, Fluke specified part only Size (HxWxL)142 mm x 69 mm x 28mmWeight200 gIP RatingIEC 60529: IP 40SafetyIEC 61010-1: 600 V CAT III, Pollution Degree 2Electromagnetic EnvironmentIEC 61326-1: PortableElectromagnetic CompatibilityApplies to use the Korea only.  Class A Equipment (Industrial Broadcasting and Communication Equipment)¹This product meets requirements for industrial (Class A) electromagnetic wave equipment and seller or user should take notice of it. This equipment is intended for use in business environments and is not to be used in homes.

Electrical specificationsAC current range1 A to 400 AOutput signal 1mV/A acAccuracy2.0 % ± 5 digits (45 Hz to 65 Hz)
2.5 % ± 5 digits (65 Hz to 400 Hz)Typical bandwith5 Hz to 20 kHzWorking voltage600 V ac rms, in compliance with IEC 61010-1 and IEC 61010-2-030Load impedance1 A to 400 AMaximum non-destructive current600 AJaw inner diameter30 mmMaximum wire size600 MCMStandard plugs19.04 mm dual banana plugs