400 Pulse Encoder

400 Pulse Encoder

Satış Fiyatı
1.238,22 TL
(Kdv Dahil)
Marka
Stok Kodu
400-Pulse
Fiyat
30,00 USD + KDV
Havale
1.219,65 TL (%1,50 havale indirimi)
*220,82 TL den başlayan taksitlerle!!
Havale/EFT ile alımlarda %1.5 İndirim Şansı
Ücretsiz Kargo İmkanı
2.000 TL ve üzeri
Kapıda Ödeme Avantajı
Kapıda ödeme yapabilirsiniz
Güvenli Alışveriş
256Bit SSL Sertifikası
Taksit Seçeneği
Kredi Kartı ile Güvenli Ödeme
LPD3806-400BM-G5-24C
 
AB Two Phase 5-24V  400  Pulses Incremental Optical Rotary Encoder 
 
     This module is ideally suited to adding rotation detection to your project and is compatible with microcontrollers such as the Arduino. The encoder lets you add control to your project similar to radio volume control knobs in cars and detecting rotation direction, speed in machines. The rotary 6mm shaft provides a large range of compatible knobs to choose from allowing you to get the right knob for your job.
Uses:
     For measuring the rotational speed of the object, angle, acceleration, and length measurements.
     Suitable for intelligent control of various displacement measurement, automatic fixed-length leather automatic guillotine machine, steel fixed length cutting controller, civil measured height human scale, college game with robots.
 
Feature:
 
AB two-phase incremental optical rotary encoder 400 pulses, NPN open collector output . (We also have 360 pulses and 600 pulses in stock, including NPN open collector output and voltage output two kinds of output. If you need please leave message for which one, or we will send by default 400 pulses and NPN open collector output ).
Standard with 1.5 m cable
Performance: 400 pulses / rev.
Operating voltage: DC5-24V
Maximum mechanical speed: 5000 rev / min
The electrical response frequency: 20K / sec
Integrated speed: 2000 rev / min
Size: Encoder body size: φ38mm; shaft φ6 × 13mm; axis platform: High 5mm, φ20mm; fixing holes for: M3 screws
Three mounting holes on the circle 30, and the other three mounting holes on the 28 circle ; side qualify.
 
    Length:38
    Width: 38
    Height: 51
    Weight: 118
    Drive Voltage:    5 - 24V DC
    Characteristics:    
    400 Pulse per revolution
    5000/min Maximum revloution speed
    20K/sec Electrical response frequency
    2000rpm Intergrated speed
    Draw Current:    30mA
    Form Factor:    6x13mm Flat sided shaft
    Mounting holes:    M3
    Operating Temperature:    -40°C to 85°C (unconfirmed)
    Number of Pieces:    1
    Included Items:    1 400BM Rotary encoder
 
Output:
     AB rectangular two-phase quadrature pulse output circuit output NPN open collector output type, this output type can and with internal pull-up resistor connected directly to the microcontroller or PLC, such as 51 single or Mitsubishi PLC (PLC's input to switch connected to 0V should work), Note: If the encoder is not connected to the device can not be directly oscilloscope oscilloscope (open collector output when there is no pull-up resistor, there is no voltage output) to oscilloscope please plus two pull-up resistor AB two-phaseoutput;
 
 
 
How to connection:                          
 
WireDescription
GreenA phase
WhiteB phase
RedVCC
BlackGND
 
 
 
400 Pulse Encoder Diğer 400 Pulse Encoder ürününü ve Endüstriyel Kontrol Çözümleri kategorisindeki ürünlerin çeşitleri ve fiyatlarını görebilirsiniz. 400-Pulse
400 Pulse Encoder

Tavsiye Et

*
*
*
IdeaSoft® | E-Ticaret paketleri ile hazırlanmıştır.