%10 İNDİRİM
FLUKE 1664 FC EU MULTI-FUNCTION INSTALLATION TESTER 500V
Satış Fiyatı
173.351,30 TL
(Kdv Dahil)
İndirimli Fiyat
155.166,75 TL
(Kdv Dahil)
Kategori
Marka
Stok Kodu
FLUKE1664 FC
Fiyat
4.200,00 USD + KDV
Havale
152.839,25 TL
(%1,50 havale indirimi)
*27.671,40 TL den başlayan taksitlerle!!
FLUKE 1664 FC AB Oto Testi, İzolasyon önteste Fluke Bağlan uyumluluğu ve AB fiş türü ile çok işlevli bir yükleme test cihazıdır. Fluke 1664 FC kurulum tester "Yalıtım Pretest" tek test cihazıdır. tester cihaz test edilen sisteme bağlı olduğunu tespit ederse, kaza sonucu hasar ortadan kaldırmamıza yardımcı, izolasyon testi durur. Otomatik Testi manuel bağlantı sayısını azaltmak ve hata yapma olasılığını azaltma, tek düğmeye basarak yedi testleri gerçekleştirir. Fluke bağlayın Smartphone test sonuçlarını göndermek ve başkalarıyla işbirliği 1664 FC yükleme test sağlar. FlukeCloud depolama kullanıcı işlemek ve sertifika oluşturmak için Fluke DMS (Data Management Software) veri aktarabilirsiniz da gerçek zamanlı olarak kararlar ofiste ya da sahada olsun saklanan sonuçlarını almak ve izin verir.
- High current loop mode, faster measurements compared to loop tests with non-trip mode for RCDs
- Z-max memory for loop tests for easy evaluation of highest loop test value
- Unique zero adapter for fast, always reliable and accurate test lead and mains cord compensation
- Fast voltage measurement between L-N, L-PE and N-PE using the mains cord
- Measure RCD trip current & trip time in parallel, PEFC or PSC and loop impedance, ring testing
- Automatic test start for Loop & RCD tests, earth Volt Touchpad detects raised earth voltages >50 V
- Rotary dial knob indicates clearly which function is selected, all in one spot with no complex menus
- Large display with backlight, clear symbols and with exceptionally wide viewing angle
- Dimension is 10cm x 25cm x 12.5cm and weight is 1.3Kg including batteries
- Complies with EN61010-1 ed 2.0 (2001-02), UL61010, ANSI/ISA -s82.02.01 2000 and CAN/CSA c22.2
Birlikte Verilen Aksesuarlar
6x AA (IEC LR6) pil, C1600 sert taşıma kutusu, sıfır adaptörü, ağır hizmet ana kablo, TL1665 STD standart test ucu kiti, boyun pedli kemer ve askı, hızlı referans kılavuzu, TP165X Uzaktan Kontrollü Prob ve uç, CD-ROM`da kullanıcı kılavuzu
| Direnç Ölçer | : | Evet |
| Ac Volt Ölçer | : | 1000 Ac Volt Ölçer |
| Dc Volt Ölçer | : | 1000 Dc Volt Ölçer |
| AC voltage measurement | ||
| Range | 500 V | |
| Resolution | 0.1 V | |
| Accuracy 45 Hz – 66 Hz | 0.8% + 3 | |
| Input impedance | 360 kΩ | |
| Overload protection | 660 V rms | |
| Continuity testing (RLO) | ||
| Range (autoranging) | 20 Ω / 200 Ω / 2000 Ω | |
| Resolution | 0.01 Ω / 0.1 Ω / 1 Ω | |
| Open Circuit Voltage | >4 V | |
| Insulation resistance measurement (RISO) | ||
| Test voltages | 50-100-250-500-1000 V | |
| Accuracy of tTest voltage (at rated test current) | +10%, -0% | |
| Test voltage | 50 V 100 V 250 V 500 V 1000 V |
|
| Insulation resistance range | 20 MΩ /50 MΩ 20 MΩ / 100 MΩ 20 MΩ / 200 MΩ 20 MΩ / 200 MΩ / 500 MΩ 20 MΩ / 200 MΩ / 1000 MΩ |
|
| Resolution | 0.01 MΩ / 0.1 MΩ 0.01 MΩ / 0.1 MΩ 0.01 MΩ / 0.1 MΩ 0.01 MΩ / 0.1 MΩ / 1 MΩ 0.01 MΩ / 0.1 MΩ / 1 MΩ |
|
| Test current | 1 mA @ 50 kΩ 1 mA @ 100 kΩ 1 mA @ 250 kΩ 1 mA @ 500 kΩ 1 mA @ 1 MΩ |
|
| Loop and line impedance (ZI) | ||
| Range | 10 Ω / 0.001 Ω / High current mΩ mode | |
| Resolution | 0.01 Ω / 0.1 Ω / 1 Ω | |
| Prospective earth fault current, PSC test | ||
| Range | 1000 A / 10 kA (50 kA) | |
| Resolution | 1 A / 0.1 kA | |
| Computation | Prospective earth fault current (PEFC) or Prospective short circuit current (PSC) determined by dividing measured mains voltage by measured loop (L-PE) resistance or line (L-N) resistance, respectively. | |
| RCD testing, RCD types tested | ||
| RCD Type | AC¹ G²,S³ |
|
| Model 1664 | A, AC, B5, S | |
| Notes | ¹Responds to AC ²General, no delay ³Time delay 4Responds to pulsed signal 5Responds to smooth DC signal |
|
| Tripping speed test (ΔT) | ||
| Current settings¹ | 10-30-100-300-500-1000 mA – VAR 10-30-100 mA |
|
| Multiplier | x ½, x 1 x 5 |
|
| Measurement range | RCD Type G | 310 ms 50 ms |
| RCD Type S | 510 ms 160 ms |
|
| Notes | ¹1000 mA type AC only 700 mA maximum type A in VAR mode VAR mode not available for type B. |
|
| RCD/FI-Tripping Current Measurement/Ramp Test (IΔN) | ||
| Current range | 30% to 110% of RCD rated current¹ | |
| Step size | 10% of IΔN² | |
| Dwell time | Type G | 300 ms/step |
| Type S | 500 ms/step | |
| Measurement accuracy | ±5% | |
| Specified trip current ranges (EN 61008-1) | 50% to 100% for Type AC 35% to 140% for Type A (>10 mA) 35% to 200% for Type A (≤10 mA) 50% to 200% for Type B ²5% for Type B |
|
| Notes | ¹30% to 150% for Type A IΔN > 10 mA 30% to 210% for Type A IΔN = 10 mA 20% to 210% for Type B |
|
| Earth Resistance Test (RE) | ||
| Range | 200 Ω / 2000 Ω | |
| Resolution | 0.1 Ω / 1Ω | |
| Frequency | 128 Hz | |
| Output Voltage | 25 V | |
| Phase Sequence Indication | ||
| Icon |  Phase Sequence indicator is active. |
|
| General Specifications | ||
| Size (L x W x H) | 10 x 25 x 12.5 cm | |
| Weight (incl. batteries) | 1.3 Kg | |
| Battery size, quantity | Type AA, 6 ea. | |
| Sealing | IP-40 | |
| Safety | Complies with EN61010-1 Ed 2.0 (2001-02), UL61010, ANSI/ISA –s82.02.01 2000 and CAN/CSA c22.2 No. 1010 2nd edition | |
| Overvoltage | CAT III / 500V; CAT IV 300V | |
| Performance | EN61557-1 to EN61557-7 Second Edition and EN61557-10 Second Edition |
|
