JDY-40 2.4G Wireless Serial Transceiver
Satış Fiyatı
82,55 TL
(Kdv Dahil)
Kategori
Stok Kodu
JDY-40
Fiyat
2,00 USD + KDV
Havale
81,31 TL
(%1,50 havale indirimi)
*14,72 TL den başlayan taksitlerle!!
JDY-40 2.4G Wireless Serial Transceiver
JDY-40 2.4G Wireless Serial Port Transmission Transceiver and Remote Communication Module IO TTL
2.4Ghz Kablosuz Alıcı Verici Modül - Seri Haberleşme TTL IO Kontrol Modülü
Description:
JDY-40 is developed with 2.4G technology, the sight distance is 120 meters, using serial port communication interface, using simple and fast, only need to understand the serial knowledge of the JDY-40 can be applied to the product.
Pin function description:
PinThe name of the disciplineFunction
1GPI01Input-output IO, which can be configured by AT+CLSS
2GPI02Input-output IO, which can be configured by AT+CLSS
3GPI03Input-output IO, which can be configured by AT+CLSS
4GPI04Input-output IO, which can be configured by AT+CLSS
5GPI05Input-output IO, which can be configured by AT+CLSS
6GPI06Input-output IO, which can be configured by AT+CLSS
7GPI07Input-output IO, which can be configured by AT+CLSS
8GPI08Input-output IO, which can be configured by AT+CLSS
9VCCPower supply (2.2-3.6)
10RXDSerial port input pin
11TXDSerial port output pin
12SETAT command switching pin (low level AT instruction, high level transparent transmission)
13CSTransmission or push button mode: CS pin (low level wake-up, high level sleep).
IO receive mode:the CS pin needs to be suspended or pulled up
14GNDPower supply
Applications:
2.4G panel switch
2.4G remote control
2.4G transmission
One to many control of mobile phone
IO switching control
2.4G toys
Smart home control application
Technical parameter:
ModelJDY-40
Working band2.4G
Emissive powerMaximum 12dB
working temperature-40 C - 80 C
Reception sensitivity-97db
transmission distance120 meters
working voltage2.2V-3.6V
TX current40mA
RX current24mA
Sleep current5uA
communication interfaceStandard TTL serial port
Default configuration:
sequencefunctionparameterinstructions
1baud rate9600AT+BAUD
2wireless ID8899AT+RFID8899
3device ID1122AT+DVID1122
4channel001AT+RFC001
5emissive power12dbAT+POWE9
6equipment typeA0AT+CLSSA0
Communication:
It is necessary to configure the RFC, DVID, and RFID that need the communication module to be the same. The module and the module can communicate. When the module comes out, the parameters are all unified, and the user can configure it according to its own needs.
AT instruction instructions:
Specifically, the JDY-40 module needs to add the ending symbol rn to send the AT instruction.
Set / query - baud rate:
instructionsresponseresponse
AT+BAUD
OKParam(1-7)
1:1200
2:2400
3:4800
4:9600
5:14400
6:19200
Default value:4
AT+BAUD
+BAUD=
Set / query -RFID:
instructionsresponseresponse
AT+RFIDOKParam(0000-FFFF)
Default value:8899
AT+RFID+BAUD=
Set / query -DVID:
instructionsresponseresponse
AT+DVIDOKParam(0000-FFFF)
Default value:8899
AT+DVID+BAUD=
Set / query -RFC:
instructionsresponseresponse
AT+RFCOKParam(001-128)
Default value:001
AT+RFC+RFC=
Paket İçeriği :
1 Adet JDY-40 2.4G Wireless Serial Transceiver
